QL82SD Datasheet, PDF (4/60 Pages) List of Unclassifed Manufacturers – 10 High Speed Bus LVDS Serial Links bandwidth up to 5 Gbps

QL82SD Device Data Sheet Rev C
LVDS SERDES Applications
The QuickSD device is designed to address the need for high-speed serial communications.
It maintains the features of standard discrete SERDES devices, but integrates these features
with customizable logic to allow for the highest degree of flexibility, performance, and
integration at the lowest cost. The QuickSD device is designed to support both transmit and
receive requirements in a single chip. The device can support multiple channels in a variety
of modes (with or without clock recovery,) a variety of translation widths (1:1 to 1:10), as
well as a range of frequencies. These capabilities make this device ideal in applications where
the performance is critical and customization is required.
The QuickSD device targets three applications: on-board, board-to-board (via common
backplane), and box-to-box (via common cable).
Software Support
The turnkey QuickWorks^ package from QuickLogic^ provides the most complete ESP and
FPGA software solution from design entry to logic synthesis, to place and route, and to
simulation. The package provides a solution for designers who use third-party tools from
Cadence, Mentor, OrCAD, Synopsys, Viewlogic, Veribest and other third-party tools for
design entry, synthesis, or simulation. A power calculator is also provided for SERDES power
consumption.
To speed up the QuickSD design process, QuickLogic includes a SERDES Wizard in its
QuickWorks package. This wizard simplifies the process of configuring the multi-channel
SERDES core into each of its modes. For details on the SERDES Wizard, please refer to "The
QL82SD Quickstart Design Guide". To find this guide go to the QuickSD device
documentation Web page at
http://www.quick logic.com/home .asp?PageID=31 5&sMenuID=1 99#Order.
Process Data
QuickSD is fabricated on a 0.25 µ, five-layer metal CMOS process. The core voltage is
2.5 Volt V_CC supply and 3.3 V tolerant I/O with the addition of 3.3 Volt V_CCIO. QuickSD is
available in commercial and industrial temperature grades.
•
4
•
•
•
www.quicklogic.com
•
•
Preliminary
© 2002 QuickLogic Corporation