OV6630 Datasheet, PDF (2/29 Pages) List of Unclassifed Manufacturers – SINGLE-CHIP CMOS CIF COLOR DIGITAL CAMERA

Table 1. Pin Description
Pin No.
01
02
Name
SVDD
RESET
03
AGCEN
Pin Type
V_IN
Function
(Default=0)
Function
(Default=0)
04
FREX
Function
(Default=0)
05
HVDD
06
ASUB
07
AGND
08
AVDD
09
PWDN
V_REF (4V)
V_IN
V_IN
V_IN
Function
(Default=0)
10
VRCAP1
11
V_CCHG
12
IICB
V_REF (1.5V)
V_REF (2.7V)
Function
(Default=0)
13
VTO
O
14
ADVDD
V_IN
15
ADGND
V_IN
16
VSYNC/CSYS I/O
17
FODD/CLK
I/O
18
HREF/VSFRAM I/O
19
*_UV7/B8
I/O
20
*_{UV6/ABKEN I/O}
21
*_UV5/MIR
I/O
22
*_UV4
I/O
23
*_UV3
I/O
24
*_UV2/QCIF
I/O
25
*_UV1/CC656
I/O
26
*_{UV0/GAMMA I/O}
27
XCLK1
I
28
XCLK2
O
29
DVDD
V_IN
30
DGND
V_IN
31
DOGND
V_IN
32
DOVDD
V_IN
33
PCLK/PWDB I/O
34
Y7/CS0
I/O
35
Y6/CS2
I/O
36
Y5/SHARP
I/O
37
Y4/CS1
I/O
38
Y3/RGB
I/O
March 4, 2000
SINGLE IC CMOS COLOR AND B/W DIGITAL CAMERAS
Array power (+3.3VDC)
Chip reset, active high
Function/Description
Automatic Gain Control (AGC) selection
“0” – Disable AGC
“1” – Enable AGC
Note: This function is disabled when OV6630/OV6130 sensor is configured in I²C mode.
Frame exposure control
“0” – Disable frame exposure control
“1” – Enable frame exposure control
Charge pump voltage. Connect to ground through 10µF capacitor.
Analog substrate voltage.
Analog ground
Analog power supply (+3.3VDC)
Power down mode selection.
“0” – Normal mode.
“1” – Power down mode.
Array reference. Connect to ground through 0.1µF capacitor.
Internal voltage reference. Connect to ground through 1µF capacitor.
I²C enable selection.
“0” – Enable I²C
“1” – Enable auto-control mode
Luminance composite signal output (black/white in PAL standard).
Analog power supply (+3.3VDC)
Analog signal ground
Vertical sync output. At power up, read as CSYS.
Field ID FODD output or main clock output
HREF output. At power up, read as VSFRAM
Bit 7 of U video component output. At power up, sampled as B8.
* Note: Output UV7 is not available on the OV6130 sensor.
Bit 6 of U video component output. At power up, sampled as ABKEN.
* Note: Output UV6 is not available on the OV6130 sensor.
Bit 5 of U video component output. At power up, sampled as MIR.
* Note: Output UV5 is not available on the OV6130 sensor.
Bit 4 of U video component output.
* Note: Output UV4 is not available on the OV6130 sensor.
Bit 3 of U video component output.
* Note: Output UV3 is not available on the OV6130 sensor.
Bit 2 of U video component output. At power up, sampled as QCIF.
* Note: Output UV2 is not available on the OV6130 sensor.
Bit 1 of U video component output. At power up, sampled as CC656.
* Note: Output UV1 is not available on the OV6130 sensor.
Bit 0 of U video component output. At power up, sampled as GAMMA.
* Note: Output UV0 is not available on the OV6130 sensor.
Crystal clock input
Crystal clock output
Digital power supply (+3.3VDC)
Digital ground
Digital interface output buffer ground
Digital interface output buffer power supply (+3.3VDC or 5VDC)
PCLK output. At power up sampled as PWDB.
Bit 7 of Y video component output. At power up, sampled as CS0.
Bit 6 of Y video component output. At power up, sampled as CS2.
Bit 5 of Y video component output. At power up, sampled as SHAPR.
Bit 4 of Y video component output. At power up, sampled as CS1.
Bit 3 of Y video component output. At power up, sampled as RGB.
Version 1.0
2