E909-05 Datasheet, PDF (66/67 Pages) ELMOS Semiconductor AG – The HALIOS® multi purpose optical sensor is based on an optical bridge which provides a contactless detec-tion of gestures (e.g. movement of a finger).

HALIOS® MULTI-PURPOSE OPTICAL SENSOR WITH HIGH LIGHT IMMUNITY
E909.05
PRELIMINARY INFORMATION AUG 02, 2011
7 Robustness
7.1 ESD
The ESD protection circuitry is measured according to AEC-Q100-002 with the following conditions:
Test Method (HBM):
• VIN = 2000 V (according to device class H1C)
• REXT = 1500 Ohm
• CEXT = 100 pF
Test Method (CDM):
• VIN = 500 V for all pins
• VIN = 750 V for corner pins
7.2 Latch up Test
Test Method:
• 100 mA positive and negative pulses at 85 °C according to AEC-Q100-004.
8 Package
8.1 Marking
8.1.1 Top side
ELMOS
E909.05A
XXX#LYWW*@
where
E/M/T
000.01
A
XXX
#
L
YWW
*
@
Volume production / prototype / test circuit
ELMOS project number
ELMOS project revision code
Production lot number
Assembler code
Production line code
Year and week of assembly
Mask revision code
ELMOS internal code
This document contains information on a pre-production product. ELMOS Semiconductor AG reserves the right to change specifications and information herein without notice.
ELMOS Semiconductor AG
Data Sheet 66 / 67
QM-No.: 25DS0014E.00