E909-05 Datasheet, PDF (6/67 Pages) ELMOS Semiconductor AG – The HALIOS® multi purpose optical sensor is based on an optical bridge which provides a contactless detec-tion of gestures (e.g. movement of a finger).

HALIOS® MULTI-PURPOSE OPTICAL SENSOR WITH HIGH LIGHT IMMUNITY
E909.05
PRELIMINARY INFORMATION AUG 02, 2011
4 Detailed Electrical Data Specification
The following conditions apply unless otherwise stated. All potentials refer to GROUND (GND) unless other-
wise specified. Currents flowing into the circuit pins have positive values.
4.1 Supply Voltages
No. Parameter
Condition
1
Digital operating current,
run mode
FSYS = 8 MHz, sys-
tem state: run
2
Digital operating current,
standby mode
System state:
standby
3
Digital operating current, off
mode
System state: off
4 Analogue operating current Analogue on = 1
5 Analogue operating current Analogue on = 0
6
Over all current consump-
tion in application mode
Active mode ¹)
7
Over all current consump-
tion in application mode
Idle mode (IIDLE =
IOFF+ I ) AVDD_OFF
8
State change from
STANDBY to RUN mode
9
State change from OFF to
RUN mode
Symbol
IDVDD
ISTANDBY
IOFF
IAVDD
IAVDD_OFF
IACTIVE
IIDLE
TSTAND-
BY2RUN
TOFF2R
UN
Min.
Typ.
5.8
1.8
4.5
2.0
16
Max. Unit
12
mA
5
mA
35
µA
5.0
mA
15
µA
2.25 mA
50
µA
3 1/FSYS
5 1/FSYS
Table 4.1.1 Supply: Parameters
____________
1_{) In application mode the current consumption is calculated from the duty cycle of the digital operating cur-}
rent and the analogue operating current.
This document contains information on a pre-production product. ELMOS Semiconductor AG reserves the right to change specifications and information herein without notice.
ELMOS Semiconductor AG
Data Sheet 6 / 67
QM-No.: 25DS0014E.00