E909-05 Datasheet, PDF (46/67 Pages) ELMOS Semiconductor AG – The HALIOS® multi purpose optical sensor is based on an optical bridge which provides a contactless detec-tion of gestures (e.g. movement of a finger).

HALIOS® MULTI-PURPOSE OPTICAL SENSOR WITH HIGH LIGHT IMMUNITY
E909.05
PRELIMINARY INFORMATION AUG 02, 2011
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit Description
15:14 reserved
13 : Clear contents of send FIFO registers
0 - read
1 - write
12 : Clear contents of receive FIFO registers
0 - read
1 - write
11 : Clear wake-up mode enable bit (see description below)
0 - read
1 - write
10 : Set wake-up mode enable bit (see description below)
0 - read
1 - write
9:8 : Slave address
"00" - $58 (reset value)
"01" - $59
"10" - $5A
"11" - $5B
7: reserved
6:4 : High water range for receive FIFO (range 0....4)
3: reserved
2:0 : Low water range for send FIFO (range 0....4)
Table 6.10.6.1 Configuration Register: I²C Control Register
6.10.7 Status Register
Register Status Register (0x06)
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Reset value
0000000000000000
Internal access R R R R R R R R R R R R R R R R
External access R R R R R R R R R R R R R R R R
Bit Description
15:9 reserved
8 : Wake-up mode enable bit
0 - wake-up mode disabled
1 - wake-up mode enabled
7: reserved
6:4 : Fill level of receive FIFO
3: reserved
2:0 : Fill level of send FIFO
Table 6.10.7.1 Configuration Register: I²C Status Register
6.10.8 Interrupt Handling
I2C receive command (see 6.11.2 List Of All Interrupts)
This document contains information on a pre-production product. ELMOS Semiconductor AG reserves the right to change specifications and information herein without notice.
ELMOS Semiconductor AG
Data Sheet 46 / 67
QM-No.: 25DS0014E.00