S6E2H Datasheet, PDF (70/163 Pages) Cypress Semiconductor – 32-bit ARM ® Cortex ® -M4F FM4 Microcontroller

S6E2H Series
13.2 Recommended Operating Conditions
Parameter
Symbol Conditions
Value
Min
Max
Power supply voltage
VCC
-
2.7*4
5.5
Power supply voltage (VBAT)
VBAT
-
2.7
5.5
Analog power supply voltage
AVCC
-
2.7
5.5
Analog reference voltage
AVRH
-
*3
AVCC
Smoothing capacitor
CS
-
1
10
Operating
Junction temperature
TJ
-
- 40
+ 125
temperature Ambient temperature
TA
-
- 40
*2
*1: See "●C pin" in "Handling Devices" for the connection of the smoothing capacitor.
Unit
Remarks
V
V
V AVCC=VCC
V
μF for built-in regulator *1
°C
°C
*2: The maximum temperature of the ambient temperature (TA) can guarantee a range that does not exceed
the junction temperature (TJ).
The calculation formula of the ambient temperature (TA) is shown below.
TA (Max) = TJ (Max) – Pd (Max) × θja
.............................. Pd: Power dissipation (W)
.........θja: Package thermal resistance (°C/W)
Pd (Max) = VCC × ICC (Max) + Σ (IOL×VOL) + Σ ((VCC-VOH) × (- IOH))
.................................................................. IOL:
.................................................................. IOH:
................................................................. VOL:
................................................................ VOH:
L level output current
H level output current
L level output voltage
H level output voltage
*3 :The minimum value of Analog reference voltage depends on the value of compare clock cycle (Tcck).
See 12.5 12-bit A/D Converter for the details.
*4: In between less than the minimum power supply voltage and low voltage reset/interrupt detection voltage or more, instruction
execution and low voltage detection function by built-in High-speed CR(including Main PLL is used) or built-in Low-speed CR is
possible to operate only.
Package thermal resistance and maximum permissible power for each package are shown below.
The operation is guaranteed maximum permissible power or less for semiconductor devices.
Document Number: 001-98943 Rev *C
Page 70 of 163