STC5415 Datasheet, PDF (43/48 Pages) Connor-Winfield Corporation – Line Card Clock

Noise Transfer Functions
STC5415
Line Card Clock
Data sheet
User may write to register Loop Bandwidth to set the PLL loop bandwidth for each timing generator. The
noise transfer function of the PLL filter is determined by the loop bandwidth. Figure 11 shows the noise transfer
functions as the loop bandwidth vary from 13Hz to 103Hz.
TBD
Figure 11: Noise Transfer Functions
Preliminary
Page 43 of 48 TM120
Rev:P1.3
© Copyright the Connor-Winfield Corp. All Rights Reserved Specifications subject to change without notice
Date: September 20, 2011