STC5415 Datasheet, PDF (36/48 Pages) Connor-Winfield Corporation – Line Card Clock

Frame_Phase_Align, 0x42 (R/W)
STC5415
Line Card Clock
Data sheet
Address
0x42
0x43
0x44
Bit7
Bit6
Bit5
Bit4
Frame Phase Alignment
and Edge Selection for
Ref2
Frame Reference Selec-
tion for Ref2
Not used
Frame Phase Alignment
and Edge Selection for
Ref5
Frame Reference Selec-
tion for Ref5
Bit3
Bit2
Frame Phase Alignment
and Edge Selection for
Ref1
Frame Phase Alignment
and Edge Selection for
Ref3
Frame Phase Alignment
and Edge Selection for
Ref4
Bit1
Bit0
Frame Reference Selec-
tion for Ref1
Frame Reference Selec-
tion for Ref3
Frame Reference Selec-
tion for Ref4
Selects frame reference input and the sampling of the selected reference for frame alignment.
Frame reference input selection:
Selects the external sync input as frame reference for Ref1~Ref5 individually. External sync inputs can take
frequency of 2kHz or 8kHz and this frequency is auto-detectable. When none of frame reference inputs is
used, set 0 to select its own frame pulse output of CLK8K as frame reference.
Bits 1 ~ 0
Bits 5 ~ 4
0
1, 2, 3
Frame Reference Select
Frame pulse output of CLK8K
generated from the device
Frame reference input EX_SYNC
Frame phase alignment and edge selection:
Selects either frame phase arbitrary mode or frame phase align mode. Selects the sampling edge on the
selected reference input in phase align mode. If phase arbitrary mode is selected, any selection of frame refer-
ence will be dismissed.
Bits 3 ~ 2
Bits 7 ~ 6
0
1
2
3
Frame phase
alignment
Frame phase
arbitrary mode
Frame phase
align mode
Frame Edge of Selected Reference Select
Dismiss frame reference selection
Rising edge nearest to the frame pulse on the
external frame reference input
Rising edge previous to the frame pulse on
the external frame reference input
Rising edge next to the frame pulse on the
external frame reference input
Default value: 0
Synth_Index_Select, 0x4A (R/W)
Address
Bit7
0x4A
Bit6
Bit5
Not Used
Bit4
Bit3
Bit2
Bit1
Bit0
Synthesizer index selection for synthesizer frequency and
phase skew adjustment
Preliminary
Page 36 of 48 TM120
Rev:P1.3
© Copyright the Connor-Winfield Corp. All Rights Reserved Specifications subject to change without notice
Date: September 20, 2011