SAM9G15_14 Datasheet, PDF (883/1215 Pages) ATMEL Corporation – ARM-based Embedded MPU

• FSDIS: Frame Slot Mode Disable
0: The Frame Slot Mode is enabled.
1: The Frame Slot Mode is disabled.
• WKUPTYP: Wakeup Signal Type
0: Setting the bit LINWKUP in the control register sends a LIN 2.0 wakeup signal.
1: Setting the bit LINWKUP in the control register sends a LIN 1.3 wakeup signal.
• DLC: Data Length Control
0 - 255: Defines the response data length if DLM=0,in that case the response data length is equal to DLC+1 bytes.
• PDCM: DMAC Mode
0: The LIN mode register US_LINMR is not written by the DMAC.
1: The LIN mode register US_LINMR (excepting that flag) is written by the DMAC.
SAM9G15 [DATASHEET]
11152F–ATARM–10-Mar-2014
883