SAM9G15_14 Datasheet, PDF (470/1215 Pages) ATMEL Corporation – ARM-based Embedded MPU

30.7.9 DDRSDRC DLL Register
Name:
Address:
Access:
Reset:
DDRSDRC_DLL
0xFFFFE824
Read-only
See Table 30-16
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
–
–
–
15
14
13
12
11
10
9
8
MDVAL
7
6
5
4
3
2
1
0
–
–
–
–
–
MDOVF
MDDEC
MDINC
The DLL logic is internally used by the controller in order to delay DQS inputs. This is necessary to center the strobe time and the
data valid window.
• MDINC: DLL Master Delay Increment
0 = The DLL is not incrementing the Master delay counter.
1 = The DLL is incrementing the Master delay counter.
• MDDEC: DLL Master Delay Decrement
0 = The DLL is not decrementing the Master delay counter.
1 = The DLL is decrementing the Master delay counter.
• MDOVF: DLL Master Delay Overflow Flag
0 = The Master delay counter has not reached its maximum value, or the Master is not locked yet.
1 = The Master delay counter has reached its maximum value, the Master delay counter increment is stopped and the DLL forces
the Master lock. If this flag is set, it means the DDRSDRC clock frequency is too low compared to Master delay line number of
elements.
• MDVAL: DLL Master Delay Value
Value of the Master delay counter.
SAM9G15 [DATASHEET]
11152F–ATARM–10-Mar-2014
470