TMD4903 Datasheet, PDF (76/86 Pages) ams AG – Color and Proximity Sensor Module with mobeam

Mechanical Data
Figure 86:
Tape and Reel Mechanical Drawing
TMD4903 − Mechanical Data
Note(s) and/or Footnote(s):
1. All linear dimensions are in millimeters. Dimension tolerance is ± 0.10 mm unless otherwise noted.
2. The dimensions on this drawing are for illustrative purposes only. Dimensions of an actual carrier may vary slightly.
3. Symbols on drawing Ao, Bo, and Ko are defined in ANSI EIA Standard 481−B 2001.
4. Each reel is 330 millimeters in diameter and contains 5000 parts.
5. ams packaging tape and reel conform to the requirements of EIA Standard 481−B.
6. In accordance with EIA standard, device pin 1 is located next to the sprocket holes in the tape.
7. This drawing is subject to change without notice.
Page 76
Document Feedback
ams Datasheet
[v1-12] 2015-May-14