TMD4903 Datasheet, PDF (43/86 Pages) ams AG – Color and Proximity Sensor Module with mobeam

TMD4903 − Register Description
Figure 52:
IRBeam Status Register
IRBeam Status Register (ISTATUS 0xA8)
7
6
5
4
3
2
1
0
Reserved
IINT
IBUSY
Field
Reserved
IINT
IBUSY
Bits
7:2
1
0
Description
Reserved.
IRBeam Interrupt. If IIEN is set, indicates that the device is asserting an
end-of-transmission interrupt after transmitting a block of data. Bit is mirrored
in the STATUS register.
IRBeam Busy. Indicates an IRBeam transmission is in progress.
Figure 53:
IRBeam Start Register
IRBeam Start Register (ISTART 0xA9)
7
6
5
4
3
2
1
0
Reserved
ISTARTREMCON ISTARTMOBEAM
Field
Reserved
ISTARTREMCON
ISTARTMOBEAM
Bits
7:2
1
0
Description
Reserved.
IRBeam Start Remote Control. Write 1 to start the remote control
machine, executing from address 0. Transmission can be stopped by
writing a 0 to this bit.
IRBeam Start mobeam. Write 1 to start a mobeam transmission.
Transmission can be stopped by writing a 0 to this bit.
ams Datasheet
[v1-12] 2015-May-14
Page 43
Document Feedback