|
TMD4903 Datasheet, PDF (32/86 Pages) ams AG – Color and Proximity Sensor Module with mobeam | |||
|
◁ |
Figure 36:
Configuration Register One
7
6
5
PGSIEN
ASIEN
TMD4903â RegisterDescription
Configuration Register One (CFG1 0x90)
CFG1 has fields that enable or disable the saturation interrupts
for Proximity and ALS and set the electrical gain of the ALS
response.
4
3
Reserved
2
1
0
AGAIN
Field
PGSIEN
ASIEN
Reserved
AGAIN
Bits
Description
7
Proximity Saturation Interrupt Enable. When asserted permits proximity
saturation interrupts to be generated.
6
ALS Saturation Interrupt Enable. When asserted permits ALS saturation
interrupts to be generated.
5:2 Reserved. Bits must be set to 0.
ALS and Color Gain Control.
FIELD VALUE
CRGB GAIN VALUE
0
1:0
1
1x Gain
4x Gain
2
16x Gain
3
64x Gain
Figure 37:
Revision ID Register
Revision ID Register (REVID 0x91)
7
6
5
4
3
2
1
0
Reserved
REV_ID
Field
Reserved
REV_ID
Bits
7:3
2:0
Description
Reserved. Default value is 00100.
Wafer die revision level. Default value is 010.
Page 32
Document Feedback
ams Datasheet
[v1-12] 2015-May-14
|
▷ |