|
EP2AGX125EF29I5N Datasheet, PDF (71/78 Pages) Altera Corporation – Device Datasheet for Arria II Devices | |||
|
◁ |
Chapter 1: Device Datasheet for Arria II Devices
Switching Characteristics
1â71
Table 1â63 lists the memory output clock jitter specifications for Arria II GZ devices.
Table 1â63. Memory Output Clock Jitter Specification for Arria II GZ Devices (Note 1), (2), (3)
Parameter
Clock
Network
Symbol
â3
Min
Max
â4
Unit
Min
Max
Clock period jitter
Regional
tJIT(per)
-55
55
-55
55
ps
Cycle-to-cycle period jitter Regional
tJIT(cc)
-110
110
-110
110
ps
Duty cycle jitter
Regional
tJIT(duty)
-82.5
82.5
-82.5
82.5
ps
Clock period jitter
Global
tJIT(per)
-82.5
82.5
-82.5
82.5
ps
Cycle-to-cycle period jitter
Global
tJIT(cc)
-165
165
-165
165
ps
Duty cycle jitter
Global
tJIT(duty)
-90
90
-90
90
ps
Notes to Table 1â63:
(1) The memory output clock jitter measurements are for 200 consecutive clock cycles, as specified in the JEDEC DDR2/DDR3 SDRAM standard.
(2) The clock jitter specification applies to memory output clock pins generated using differential signal-splitter and DDIO circuits clocked by a
PLL output routed on a regional or global clock network as specified. Altera recommends using regional clock networks whenever possible.
(3) The memory output clock jitter stated in Table 1â63 is applicable when an input jitter of 30 ps is applied.
Duty Cycle Distortion (DCD) Specifications
Table 1â64 lists the worst-case DCD specifications for Arria II GX devices.
Table 1â64. Duty Cycle Distortion on I/O Pins for Arria II GX Devices (Note 1)
Symbol
C4
I3, C5, I5
C6
Unit
Min Max Min Max Min Max
Output Duty Cycle
45
55
45
55
45
55
%
Note to Table 1â64:
(1) The DCD specification applies to clock outputs from the PLL, global clock tree, IOE driving dedicated, and general
purpose I/O pins.
Table 1â65 lists the worst-case DCD specifications for Arria II GZ devices.
Table 1â65. Duty Cycle Distortion on I/O Pins for Arria II GZ Devices (Note 1)
Symbol
C3, I3
C4, I4
Unit
Min
Max
Min
Max
Output Duty Cycle
45
55
45
55
%
Note to Table 1â65:
(1) The DCD specification applies to clock outputs from the PLL, global clock tree, IOE driving dedicated, and general
purpose I/O pins.
July 2012 Altera Corporation
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
|
▷ |