EPM9320LI84-20 Datasheet, PDF (40/46 Pages) Altera Corporation – Programmable Logic Device Family

MAX 9000 Programmable Logic Device Family Data Sheet
Notes:
(1) All pins not listed are user I/O pins.
(2) Perform a complete thermal analysis before committing a design to this device package. See Application Note 74
(Evaluating Power for Altera Devices).
(3) EPM9320A devices are not offered in this package.
(4) During in-system programming, each device’s VPP pin must be connected to the 5.0-V power supply. During
normal device operation, the VPP pin is pulled up internally and can be connected to the 5.0-V supply or left
unconnected.
(5) The user I/O pin count includes dedicated input pins and all I/O pins.
Table 27. EPM9400 Dedicated Pin-Outs Note (1)
Pin Name
DIN1 (GCLK1)
DIN2 (GCLK2)
DIN3 (GCLR)
DIN4 (GOE)
TCK
TMS
TDI
TDO
GND
VCCINT (5.0 V only)
VCCIO (3.3 or 5.0 V)
No Connect (N.C.)
VPP (3)
Total User I/O Pins (4)
84-Pin PLCC (2)
208-Pin RQFP
240-Pin RQFP
2
182
210
1
183
211
12
153
187
74
4
234
43
78
91
54
49
68
42
31
6, 13, 20, 26, 27, 47, 60,
66, 69, 73
16, 23, 30, 56, 63, 70
17, 37, 59, 80
–
55
59
79
92
108
114
14, 20, 24, 31, 35, 41, 42, 5, 14, 25, 34, 45, 54, 65,
43, 44, 46, 47, 66, 85, 102, 66, 81, 96, 110, 115, 126,
110, 113, 114, 115, 116, 127, 146, 147, 166, 167,
118, 121, 122, 132, 133, 186, 200, 216, 229
143, 152, 170, 189, 206
10, 19, 30, 45, 112, 128, 4, 24, 44, 64, 117, 137,
139, 148
157, 177
5, 25, 36, 55, 72, 91, 111, 15, 35, 55, 73, 86, 101,
127, 138, 159, 176, 195 116, 136, 156, 176, 192,
205, 220, 235
6, 7, 8, 9, 11, 12, 13, 109, 1, 2, 3, 6, 7, 8, 9, 10, 11,
144, 145, 146, 147, 149, 12, 13, 168, 169, 170,
150, 151
171, 172, 173, 174, 175,
178, 179, 180, 181, 182,
183, 184, 185, 236, 237,
238, 239, 240
48
67
139
159
Notes:
(1) All pins not listed are user I/O pins.
(2) Perform a complete thermal analysis before committing a design to this device package. See Application Note 74
(Evaluating Power for Altera Devices) for more information.
(3) During in-system programming, each device’s VPP pin must be connected to the 5.0-V power supply. During
normal device operation, the VPP pin is pulled up internally and can be connected to the 5.0-V supply or left
unconnected.
(4) The user I/O pin count includes dedicated input pins and all I/O pins.
40
Altera Corporation