AKD4128A-A Datasheet, PDF (4/52 Pages) Asahi Kasei Microsystems – AK4128A-A Evaluation Board Rev.0

[AKD4128A-A]
3) Set up the evaluation mode, jumper pins. (See the followings.)
(1). Setting for Input port
(1)-1. When using DIR function of AK4114 (U2,U3,U4 and U5)
(1)-2. When using all clocks are fed through the 10pin port
(2). Setting for Output port
(2)-1. When using DIT function of AK4114 (U6)
(2)-2. When using all clocks are fed through the 10pin port(PORT5).
(3). Other jumper pins setup.
4) Power on.
The AK4128A should be reset once bringing SW2 (PDN) “L” upon power-up.
[KM104301]
-4-
2010/09