AKD4128A-A Datasheet, PDF (12/52 Pages) Asahi Kasei Microsystems – AK4128A-A Evaluation Board Rev.0

(3). Other jumper pins setup.
[ JP9 (SEL1) ]É¿The selection of input signal to IMCLK pin.
IMCLK É¿Connect to MCLK signal of DIR or 10 pin PORT. (Default)
GND É¿Connect to GND
[ JP10 (ILRCK2-SEL) ]É¿The selection of input signal to ILRCK2 pin.
ILRCK2É¿Connect to LRCK2 signal of DIR or 10 pin PORT. (Default)
GND É¿Connect to GND
[ JP11 (ILRCK3-SEL) ]É¿The selection of input signal to ILRCK3 pin.
ILRCK3É¿Connect to LRCK3 signal of DIR or 10 pin PORT. (Default)
GND É¿Connect to GND
[ JP12 (IBICK3-SEL) ]É¿The selection of input signal to IBICK3 pin.
IBICK3É¿Connect to BICK3 signal of DIR or 10 pin PORT. (Default)
GND É¿Connect to GND
[ JP13 (ILRCK4-SEL) ]É¿The selection of input signal to ILRCK4 pin.
ILRCK4É¿Connect to LRCK4 signal of DIR or 10 pin PORT. (Default)
GND É¿Connect to GND
[ JP14 (IBICK4-SEL) ]É¿The selection of input signal to IBICK4 pin.
IBICK4 É¿Connect to BICK4 signal of DIR or 10 pin PORT. (Default)
GND É¿Connect to GND
[ JP15 (SEL2) ]É¿The selection of input signal to INAS pin.
INAS É¿Connect to INAS signal (Default)
GND É¿Connect to GND
[ JP16 (UNLOCK) ]É¿The selection of connection to UNLOCK pin and LE1.
OPEN É¿Unconnection.
SHORT É¿Connection. (Default)
[ JP21 (TST0) ]É¿The selection of connection to TST0 pin and SW17(TST0).
OPEN É¿Unconnection.
SHORT É¿Connection. (Default)
[ JP22 (TST1) ]É¿The selection of connection to TST1 pin and SW3(TST1).
OPEN É¿Unconnection.
SHORT É¿Connection. (Default)
[ JP23 (TST2) ]É¿The selection of connection to TST2 pin and SW3(TST2).
OPEN É¿Unconnection.
SHORT É¿Connection. (Default)
[ JP24 (SEL4) ]É¿The selection of input signal to SDA pin.
SDA É¿Connect to SDA signal of 10 pin PORT(PORT11). (Default)
GND É¿Connect to GND
[ JP25 (TST3) ]É¿The selection of connection to TST3 pin and SW17(TST3).
OPEN É¿Unconnection.
SHORT É¿Connection. (Default)
[KM104301]
- 12 -
[AKD4128A-A]
2010/09