AKD4753-A Datasheet, PDF (20/60 Pages) Asahi Kasei Microsystems – AK4753 Evaluation Board Rev.2

[AKD4753-A]
1-4-3. Indication of a frequency characteristic
A frequency characteristic is displayed when push a [F Response] button. Then, a register set point is also
updated.
Change "Frequency Range", and indication of a frequency characteristic is updated when push a [UpDate]
button.
Figure 26. A frequency characteristic indication result
Followings are the cases when a register set value is updated.
(1) When [Register Setting] button was pushed.
(2) When [F Response] button was pushed.
(3) When [UpDate] button was pushed on a frequency characteristic indication window.
(4) When set ON/OFF of a check button “HPF LPF Enable”, “HPF” ,”LPF”,“EQ1”, “EQ2”, “EQ3”,
“EQ4”, “EQ5”
KM103902
- 20 -
2011/01