AKD4753-A Datasheet, PDF (12/60 Pages) Asahi Kasei Microsystems – AK4753 Evaluation Board Rev.2

[AKD4753-A]
Control Soft Manual
■ Evaluation Board and Control Soft Settings
1. Set an evaluation board properly.
2. Connect Evaluation board to PC with USB cable.
USB control is recognized as HID (Human Interface Device) on the PC.
When it can not be recognized correctly please Connect Evaluation board to PC with USB cable.
3.Proceed evaluation by following the process below.
■Operation Screen
1. Start up the control program following the process above.
2. After the evaluation board’s power is supplied, the AK4753 must be reset once bring S2 (AK4753-PDN) “L” to
“H”.
3. The operation screen is shown below.
KM103902
Figure 17. Window of Control Soft
- 12 -
2011/01