|
AKD4753-A Datasheet, PDF (13/60 Pages) Asahi Kasei Microsystems – AK4753 Evaluation Board Rev.2 | |||
|
◁ |
[AKD4753-A]
â Operation Overview
Function, register map and testing tool can be controlled by this control soft. These controls are selected by upper tabs.
Buttons which are frequently used such as register initializing button âWrite Defaultâ, are located outside of the
switching tab window. Refer to the ââ Dialog Boxesâ for details of each dialog box setting.
1. [Port Reset]: For when connecting to USB I/F board (AKDUSBIF-B)
Click this button after the control soft starts up when connecting USB I/F board (AKDUSBIF-B).
2. [Write Default]: Register Initializing
When the device is reset by a hardware reset, use this button to initialize the registers.
3. [All Write]: Executing write commands for all registers displayed.
4. [All Read]: Executing read commands for all registers displayed.
5. [Save]: Saving current register settings to a file.
6. [Load]: Executing data write from a saved file.
7. [All Reg Write]: âAll Reg Writeâ dialog box is popped up.
8. [Data R/W]: âData R/Wâ dialog box is popped up.
9. [Sequence]: âSequenceâ dialog box is popped up.
10. [Sequence(File)]: âSequence(File)â dialog box is popped up.
11. [EEPROM Write]: Executing EEPROM write.
12. [Read]: Reading current register settings and display on to the Register area on the right of the main window.
This is different from [All Read] button, it does not reflect to a register map, only displaying
hexadecimal.
KM103902
- 13 -
2011/01
|
▷ |