ADSP-SC582 Datasheet, PDF (87/168 Pages) Analog Devices – SHARC plus Dual Core DSP with ARM Cortex-A5

Preliminary Technical Data _{ADSP-SC582/583/584/587/589/ADSP-21583/584/587}
ABSOLUTE MAXIMUM RATINGS
Stresses at or above those listed in Table 36 may cause perma-
nent damage to the product. This is a stress rating only;
functional operation of the product at these or any other condi-
tions above those indicated in the operational section of this
specification is not implied. Operation beyond the maximum
operating conditions for extended periods may affect product
reliability.
Table 36. Absolute Maximum Ratings
Parameter
Rating
Internal (Core) Supply Voltage (V_{DD_INT}) –0.33 V to +1.20 V
External (I/O) Supply Voltage
(V_{DD_EXT})
–0.33 V to +3.60 V
DDR2/LPDDR Controller Supply
Voltage (V_{DD_DMC})
–0.33 V to +1.90 V
DDR3 Controller Supply Voltage
(V_{DD_DMC})
USB PHY Supply Voltage (V_{DD_USB})
–0.33 V to +1.60 V
–0.33 V to +3.60 V
Real Time Clock Supply Voltage
(V_{DD_RTC})
PCIe Transmit Supply Voltage
(V_{DD_PCIE_TX})
–0.33 V to +3.60 V
–0.33 V to +1.20 V
PCIe Receive Supply Voltage
(V_{DD_PCIE_RX})
–0.33 V to +1.20 V
PCIe Supply Voltage (V_{DD_PCIE})
–0.33 V to +3.60 V
HADC Supply Voltage (V_{DD_HADC})
–0.33 V to +3.60 V
HADC Reference Voltage (V_{HADC_REF}) –0.33 V to +3.60 V
DDR2/LPDDR Input Voltage
–0.33 V to +1.90 V
DDR3 Input Voltage
–0.33 V to +1.60 V
Input Voltage
–0.33 V to +3.60 V
Output Voltage Swing
Storage Temperature Range
–0.33 V to V_{DD_EXT} +0.5 V
–65C to +150C
Junction Temperature While Biased 133C
Table 37. Max Duty Cycle for Input Transient Voltage^{1, 2}
Maximum Duty Cycle (%)²
100
V_IN Min (V)³
TBD
V_IN Max (V)³
TBD
50
TBD
TBD
40
TBD
TBD
25
TBD
TBD
20
TBD
TBD
15
TBD
TBD
10
TBD
TBD
1 _{Applies to all signal balls with the exception of SYS_CLKIN0, SYS_CLKIN1,}
SYS_XTAL0, SYS_XTAL1, and all the USB, TWI, PCI, and DMC0 signals.
2 _{Applies only when VDD_EXT is within specifications. When VDD_EXT is}
outside specifications, the range is VDD_EXT ± 0.2 V.
3 _{The individual values cannot be combined for analysis of a single instance of}
overshoot or undershoot. The worst case observed value must fall within one of
the specified voltages, and the total duration of the overshoot or undershoot
(exceeding the 100% case) must be less than or equal to the corresponding duty
cycle.
ESD SENSITIVITY
ESD (electrostatic discharge) sensitive device.
Charged devices and circuit boards can discharge
without detection. Although this product features
patented or proprietary protection circuitry, damage
may occur on devices subjected to high energy ESD.
Therefore, proper ESD precautions should be taken to
avoid performance degradation or loss of functionality.
PACKAGE INFORMATION
The information presented in Figure 9 and Table 38 provides
details about the package branding for the processors. For a
complete listing of product availability, see Pre Release Products
on Page 167.
a
ADSP-SC589
tppZccc
vvvvvv.x n.n
#yyww country_of_origin
Figure 9. Product Information on Package¹
1 _{Exact brand may differ, depending on package type.}
Table 38. Package Brand Information
Brand Key
ADSP-SC589
Field Description
Product Name¹
t
Temperature Range
pp
Package Type
Z
RoHS Compliant Option
ccc
See Ordering Guide
vvvvvv.x
Assembly Lot Code
n.n
Silicon Revision
#
RoHS Compliant Designation
yyww
Date Code
1 _{See available products in Pre Release Products.}
Rev. PrF | Page 87 of 168 | February 2016