Z8F64820100ZCOG Datasheet, PDF (9/48 Pages) Zilog, Inc. – Power to the Board with overcurrent protection

Z8 Encore! XP^® F6482 Series Development Kit
User Manual
1
The Z8 Encore! XP^® F6482 Series
Development Kit
This document describes how to set up the F6482 Series Development Kit (Zilog part
number Z8F64820100ZCOG) and use it to evaluate your Z8F6482-based designs and
applications. The Kit features a development board consisting of four LEDs, three push-
buttons, a buzzer/speaker, a 7.1 seven-segment LCD, a pyroelectric sensor, a phototransis-
tor, 32Mbit SPI Flash, port pin headers, and USB and UART ports. The Board features the
Z8F6482 MCU in a 80-pin LQFP package, plus a DBG connector to connect the Board to
a host development PC using Zilog’s USB SmartCable. To learn more about the Z8F6482
MCU, refer to the F6482 Series Product Specification (PS0294).
This document provides instructions for setting up and configuring Z86482 Development
Board and includes schematic diagrams and a discussion of Board features and ZDS II.
The first sections of this document guide you through the following tasks:
• Download and Install the ZDSII Software and Documentation – see page 4
– Installing the USB SmartCable Driver – see Appendix B. Installing the USB
SmartCable Driver on page 36
• Connect the F6482 Series Development Board to your PC – see page 6
• Start the Z8F6482 Demonstration Program – see page 8
Further details, including memory configurations, jumper settings, and a listing of sample
projects can be found in the Z8F6482 Sample Projects section on page 30.
Figure 1 shows an image of the F6482 Series Development Kit.
UM026302-0916
The Z8 Encore! XP^® F6482 Series Development Kit