Z8F64820100ZCOG Datasheet, PDF (21/48 Pages) Zilog, Inc. – Power to the Board with overcurrent protection

Z8 Encore! XP^® F6482 Series Development Kit
User Manual
13
Table 2. USB to TTL Serial Converter Connections
Z8F6482 Board
J20-1 VCC
J20-4 RXD
J20-5 TXD
J20-6 GND
USB to TTL Serial Converter
5V
TXD
RXD
GND
2. Connect the other end to your PC.
3. In HyperTerminal, choose File Properties; then, if your PC has a serial interface,
select the COM port assigned to your serial port. If you do not have a serial port on
your PC, use a USB-to-serial adapter (not included in the kit).
4. From the Windows Control Panel, navigate via the Device Manager to Ports (COM &
LPT) to determine the correct COM port assigned to your adapter. Configure this port
to reflect the following settings:
– 57600 bps
– 8 data bits
– No parity
– 1 stop bit
– No flow control
5. In HyperTerminal, click the Call button to connect to the F6482 Series Development
Board. When connected, you should be able to see the demonstration program menu
shown in Figure 11.
F6482 Series Development Board
The purpose of the F6482 Series Development Kit is to provide a set of hardware and soft-
ware tools for applications based on the Z8F6482 microcontroller. An image of the F6482
Series Development Board is shown in Figure 12; a block diagram is shown in Figure 13.
UM026302-0916
F6482 Series Development Board