Z8F64820100ZCOG Datasheet, PDF (16/48 Pages) Zilog, Inc. – Power to the Board with overcurrent protection

Z8 Encore! XP^® F6482 Series Development Kit
User Manual
8
4. With the USB A (male) to Mini-B cable, connect Port P1 on the F6482 Series Devel-
opment Board to a USB port on the development PC to apply power to the Develop-
ment Board, as highlighted in Figure 5.
Figure 5. Power Supply Port P1 Connector
Start the Z8F6482 Demonstration Program
The F6482 Series Development Kit includes a sample program that demonstrates a blink-
ing LED application. An optional terminal emulation program and a 3rd Party USB to
TTL Serial converter (not supplied) maybe used and must be configured for 57600-8-N-1
with no flow control, as described in the HyperTerminal Configuration section on page 12.
To get started with the Z8F6482 demonstration, observe the following procedure.
1. Launch ZDSII by navigating from the Windows Start menu to Programs → Zilog
ZDS II – Z8 Encore! <version> → ZDS II – Z8 Encore! <version>.
2. From the File menu in ZDSII, select Open Project as shown in Figure 6, and navigate
via the following filepath.
<ZDS Install>\samples\XP_F6482\XP_F6482_LedBlink_C
The Z8 Encore! XP^® F6482 Series Development Kit
UM026302-0916