Z16C30_08 Datasheet, PDF (14/102 Pages) Zilog, Inc. – CMOS USC Universal Serial Controller

Z16C30
Product Specification
10
Electrical Characteristics
Table 2. Absolute Maximum Ratings
Symbol Description
Min
V_CC
T_STG
T_A
Supply Voltage (*)
Storage Temp.
Oper Ambient
Temp
–0.3
–65°
Power Dissipation
*_{Voltage on all pins with respect to GND.}
†_{See Ordering Information on page 97.}
Max
+7.0
+150°
†
2.2
Units
V
C
C
W
Stresses greater than those listed under Absolute Maximum Ratings may cause permanent
damage to the device. This is a stress rating only; operation of the device at any condition
above those indicated in the operational sections of these specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Standard Test Conditions
The DC Characteristics and Capacitance section below apply for the following standard
test conditions, unless otherwise noted. All voltages are referenced to GND. Positive cur-
rent flows into the referenced pin (Figure 5 on page 11). Standard conditions are as fol-
lows:
• +4.5 V < V_CC < +5.5 V
• GND = 0 V
• T_A as specified in Ordering Information on page 97
DS007902-0708
PRELIMINARY
Electrical Characteristics