 English |
|
|
|
|
|
|
|
| Z86E04 Datasheet, PDF (10/44 Pages) Zilog, Inc. – CMOS Z8 OTP MICROCONTROLLERS | |||
| |||
| ◁ |
Z86E04/E08
CMOS Z8 OTP Microcontrollers
DC ELECTRICAL CHARACTERISTICS (Continued)
Zilog
Sym Parameter
TA = 0°C to +70°C Typical
VCC [4] Min
Max @ 25°C Units Conditions
Notes
ICC1 Standby Current
(Low Noise Mode)
ICC2 Standby Current
4.5V
5.5V
4.5V
5.5V
4.5V
5.5V
4.5V
4.0
2.5
mA HALT Mode VIN = 0V,
7
VCC @ 1 MHz
4.0
2.5
mA HALT Mode VIN = 0V,
7
VCC @ 1 MHz
4.5
2.8
mA HALT Mode VIN = 0V,
7
VCC @ 2 MHz
4.5
2.8
mA HALT Mode VIN = 0V,
7
VCC @ 2 MHz
5.0
3.0
mA HALT Mode VIN = 0V,
7
VCC @ 4 MHz
5.0
3.0
mA HALT Mode VIN = 0V,
7
VCC @ 4 MHz
10.0
1.0
µA STOP Mode VIN = 0V, VCC
7,8
WDT is not Running
5.5V
10.0
1.0
µA STOP Mode VIN = 0V,VCC
7,8
WDT is not Running
IALL Auto Latch Low
Current
IALH Auto Latch High
Current
4.5V
5.5V
4.5V
5.5V
32.0
16
32.0
16
â16.0 â8.0
â16.0 â8.0
µA 0V < VIN < VCC
µA 0V < VIN < VCC
µA 0V < VIN < VCC
µA 0V < VIN < VCC
Notes:
1. Port 2 and Port 0 only
2. VSS = 0V = GND
3. The device operates down to VLV of the specified frequency for VLV . The minimum operational VCC is determined on the value of
the voltage VLV at the ambient temperature. The VLV increases as the temperature decreases.
4. VCC = 4.5 to 5.5V, typical values measured at VCC = 5.0V.
The VCC voltage specification of 5.5 V guarantees 5.0 V ± 0.5V with typical values measured at VCC = 5.0V.
5. Standard Mode (not Low EMI Mode)
6. Z86E08 only
7. All outputs unloaded and all inputs are at VCC or VSS level.
8. If analog comparator is selected, then the comparator inputs must be at VCC level.
10
PRELIMINARY
DS97Z8X1104
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese