English
Language : 

XA2C32A Datasheet, PDF (3/14 Pages) Xilinx, Inc – AEC-Q100 device qualification and full PPAP support
◁
R
XA2C32A CoolRunner-II Automotive CPLD
Absolute Maximum Ratings
Symbol
Description
Value
Units
VCC
Supply voltage relative to ground
–0.5 to 2.0
V
VCCIO
VJTAG(2)
Supply voltage for output drivers
JTAG input voltage limits
–0.5 to 4.0
V
–0.5 to 4.0
V
VCCAUX
VIN(1)
VTS(1)
TSTG(3)
JTAG input supply voltage
Input voltage relative to ground
Voltage applied to 3-state output
Storage Temperature (ambient)
–0.5 to 4.0
V
–0.5 to 4.0
V
–0.5 to 4.0
V
–65 to +150
°C
TJ
Junction Temperature
+125
°C
Notes:
1. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easiest to achieve. During transitions,
the device pins may undershoot to –2.0v or overshoot to +4.5V, provided this over or undershoot lasts less than 10 ns and with the
forcing current being limited to 200 mA.
2. Valid over commercial temperature range.
3. For soldering guidelines and thermal considerations, see the Device Packaging information on the Xilinx website. For Pb free
packages, see XAPP427.
Recommended Operating Conditions
Symbol
Parameter
Min
VCC
Supply voltage for internal logic Industrial TA = -40°C to +85°C
1.7
and input buffers
Q-Grade TA = –40°C to +105°C,
1.7
TJ Maximum = +125°C
VCCIO
Supply voltage for output drivers @ 3.3V operation
3.0
Supply voltage for output drivers @ 2.5V operation
2.3
Supply voltage for output drivers @ 1.8V operation
1.7
Supply voltage for output drivers @ 1.5V operation
1.4
VCCAUX
JTAG programming pins
1.7
Max Units
1.9
V
1.9
V
3.6
V
2.7
V
1.9
V
1.6
V
3.6
V
DC Electrical Characteristics (Over Recommended Operating Conditions)
Symbol
Parameter
Test Conditions
Typical
ICCSB
Standby current Industrial
VCC = 1.9V, VCCIO = 3.6V
38
ICCSB
Standby current Q-grade
VCC = 1.9V, VCCIO = 3.6V
38
ICC (1)
Dynamic current
f = 1 MHz
-
f = 50 MHz
-
CJTAG
JTAG input capacitance
f = 1 MHz
-
CCLK
Global clock input capacitance
f = 1 MHz
-
CIO
I/O capacitance
f = 1 MHz
-
IIL(2)
Input leakage current
VIN = 0V or VCCIO to 3.9V
-
IIH
I/O High-Z leakage
VIN = 0V or VCCIO to 3.9V
-
Notes:
1. 16-bit up/down resettable binary counter (one per Function Block) tested at VCC = VCCIO = 1.9V
Max.
150
550
1.0
4.0
10
12
10
+/-10
+/-10
Units
μA
μA
mA
mA
pF
pF
pF
μA
μA
DS552 (v1.1) May 5, 2007
www.xilinx.com
3
Product Specification
 ▷