W741E260 Datasheet, PDF (80/94 Pages) Winbond – 4-BIT FLASH MICROCONTROLLER

W741E260
Instruction Set Table 2, continued
MOVA R, HCFL
Move HCF0~3 to ACC & R
Machine Code:
Machine Cycle:
Operation:
Description:
01001001
0 R6 R5 R4 R3 R2 R1 R0
1
ACC, R ← HCF0~3
The contents of HCF bit 0 to bit 3 (HCF0 to HCF3) are loaded to the data
memory location addressed by R6 to R0 and the ACC. The ACC contents
and the meaning of the bits after execution of this instruction are as follows:
Bit 0
HCF0: "1" when the HOLD mode is released by
overflow from the Divider 0.
Bit 1
HCF1: "1" when the HOLD mode is released by
underflow from Timer 0.
Bit 2
HCF2: "1" when the HOLD mode is released by
a signal change on port RC.
Bit 3 Reserved.
Flag Affected:
MOVA R, PAGE
Machine Code:
Machine Cycle:
Operation:
Description:
Flag Affected:
ZF
Move Page Register content to ACC & R
01011111
1 R6 R5 R4 R3 R2 R1 R0
1
ACC , R ← (Page Register)
The contents of the Page Register (PR) are loaded to the data memory
location addressed by R6 to R0 and the ACC.
ZF
- 80 -