|
W83697HF_05 Datasheet, PDF (6/102 Pages) Winbond – LPC I/O | |||
|
◁ |
W83697HF
--- Break, parity, overrun, framing error simulation
⢠Programmable baud generator allows division of 1.8461 MHz and 24 MHz by 1 to (216-1)
⢠Maximum baud rate up to 921k bps for 14.769 MHz and 1.5M bps for 24 MHz
Infrared
⢠Support IrDA version 1.0 SIR protocol with maximum baud rate up to 115.2K bps
⢠Support SHARP ASK-IR protocol with maximum baud rate up to 57,600 bps
⢠Support Consumer IR with Wake-Up function.
Parallel Port
⢠Compatible with IBM parallel port
⢠Support PS/2 compatible bi-directional parallel port
⢠Support Enhanced Parallel Port (EPP) â Compatible with IEEE 1284 specification
⢠Support Extended Capabilities Port (ECP) â Compatible with IEEE 1284 specification
⢠Extension FDD mode supports disk drive B; and Extension 2FDD mode supports disk drives A
and B through parallel port
⢠Enhanced printer port back-drive current protection
Game Port
⢠Support two separate Joysticks
⢠Support every Joystick two axes (X, Y) and two buttons (S1,S2) controllers
MIDI Port
⢠The baud rate is 31.25 K baud rate
⢠16-byte input FIFO
⢠16-byte output FIFO
Flash ROM Interface
⢠Support up to 4M flash ROM
General Purpose I/O Ports
⢠48 programmable general purpose I/O ports
⢠General purpose I/O ports can serve as simple I/O ports, watch dog timer output, power LED
output, infrared I/O pins, suspend LED output, Beep output
⢠Functional in power down mode
Publication Release Date: April 14, 2005
-3-
Revision2.0
|
▷ |