W25Q32JVTBIQ-TR Datasheet, PDF (57/76 Pages) Winbond – 3V 32M-BIT SERIAL FLASH MEMORY WITH DUAL, QUAD SPI

W25Q32JV
Global Block/Sector Lock (7Eh)
All Block/Sector Lock bits can be set to 1 by the Global Block/Sector Lock instruction. The command must
be issued by driving /CS low, shifting the instruction code “7Eh” into the Data Input (DI) pin on the rising
edge of CLK, and then driving /CS high. A Write Enable instruction must be executed before the device will
accept the Global Block/Sector Lock Instruction (Status Register bit WEL= 1).
/CS
CLK
Mode 3
Mode 0
DI
(IO0)
DO
(IO1)
01234567
Mode 3
Mode 0
Instruction (7Eh)
High Impedance
Figure 56. Global Block Lock Instruction
Global Block/Sector Unlock (98h)
All Block/Sector Lock bits can be set to 0 by the Global Block/Sector Unlock instruction. The command
must be issued by driving /CS low, shifting the instruction code “98h” into the Data Input (DI) pin on the
rising edge of CLK, and then driving /CS high. A Write Enable instruction must be executed before the
device will accept the Global Block/Sector Unlock Instruction (Status Register bit WEL= 1).
/CS
CLK
Mode 3
Mode 0
DI
(IO0)
DO
(IO1)
0 1 2 3 4 5 6 7 Mode 3
Mode 0
Instruction (98h)
High Impedance
Figure 57. Global Block Unlock Instruction
- 56 -
Publication Release Date: August 30, 2016
Revision C