W83781D Datasheet, PDF (45/53 Pages) Winbond – MONITORING IC

8.36 Temperature Sensor 3 Temperature Register - Index 51h (Bank 2)
Register Location:
Attribute:
Size:
51h
Read Only
8 bits
7 6 5 4 32 1 0
W83781D
PRELIMINARY
Reserved
Bit 7: Temperature <0> of sensor2, which is low byte.
Bit 6-0: Reserved. This bit should be set to 0.
TEMP2<0>
8.37 Temperature Sensor 3 Configuration Register - Index 52h (Bank 2)
Register Location:
52h
Power on Default Value
<7:0> = 0x00
Size:
8 bits
7 6 5 4 32 1 0
STOP3
INTMOD
Reserved
FAULT
FAULT
Reserved
Reserved
Reserved
Bit 7-5: Read - Reserved. This bit should be set to 0.
Bit 4-3: Read/Write - Number of faults to detect before setting OVF# output to avoid false tripping
due to noise.
Bit 2: Read - Reserved. This bit should be set to 0.
Bit 1: Read/Write - Interrupt Mode select. This bit default is set to 0, which is Compared Mode. When
set to 1, Interrupt Mode will be selected.
Bit 0: Read/Write - When set to 1 the sensor will stop monitor.
- 40 -
Publication Release Date : Nov. 1997
Revision 0.60