W25X16_08 Datasheet, PDF (33/50 Pages) Winbond – 16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

W25X16, W25X16A, W25X32, W25X64
13. ELECTRICAL CHARACTERISTICS ⁽¹⁾
13.1 Absolute Maximum Ratings ⁽²⁾
PARAMETERS
SYMBOL CONDITIONS
Supply Voltage
VCC
Voltage applied to any Pin
VIO
Relative to Ground
Transient Voltage on any Pin
VIOT
<20nS Transient
Relative to Ground
Storage Temperature
TSTG
Lead Temperature
TLEAD
Electrostatic Discharge Voltage VESD
Human Body Model⁽⁴⁾
RANGE
–0.6 to +4.0
–0.6 to VCC +0.4
UNIT
V
V
–2.0V to VCC+2.0V V
–65 to +150
°C
See Note ⁽³⁾
°C
–2000 to +2000
V
Notes:
1. Specifications for W25X16A, W25X32 and W25X64 are preliminary. See preliminary designation at
the end of this datasheet.
2. This device has been designed and tested for the specified operation ranges. Proper operation
outside of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device
reliability. Exposure beyond absolute maximum ratings may cause permanent damage.
3. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly
and the European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
4. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 ohms, R2=500 ohms).
13.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
SPEC
MIN
MAX
Supply Voltage⁽¹⁾
Ambient Temperature,
Operating
VCC
TA
F_R = 50MHz, fR = 33MHz
F_R = 75MHz, fR = 33MHz
Industrial
2.3
3.6
2.7
3.6
–40
+85
Note:
1. Lower Supply Voltage range (2.3V to 3.6V) only applies to W25X16AL.
UNIT
V
°C
- 33 -
Publication Release Date: may 5, 2008
Revision I