W39V080A Datasheet, PDF (17/34 Pages) Winbond – 1M × 8 CMOS FLASH MEMORY WITH LPC INTERFACE

W39V080A
9. DC CHARACTERISTICS
9.1 Absolute Maximum Ratings
PARAMETER
Power Supply Voltage to VSS Potential
Operating Temperature
Storage Temperature
D.C. Voltage on Any Pin to Ground Potential
VPP Voltage
Transient Voltage (<20 nS) on Any Pin to Ground Potential
RATING
-0.5 to +4.0
0 to +70
-65 to +150
-0.5 to VDD +0.5
-0.5 to +13
-1.0 to VDD +0.5
UNIT
V
°C
°C
V
V
V
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings May adversely affect the life and reliability
of the device.
9.2 Programmer interface Mode DC Operating Characteristics
(VDD = 3.3V ± 0.3V, VSS= 0V, TA = 0 to 70° C)
PARAMETER
SYM.
TEST CONDITIONS
LIMITS
UNIT
MIN. TYP. MAX.
In Read or Write mode, all DQs open
Power Supply Current
(read)
ICC1 _{Address inputs = 3.0V/0V, at f = 3}
-
15
20 mA
MHz
In Read or Write mode, all DQs open
Power Supply Current
(erase/ write)
ICC2 _{Address inputs = 3.0V/0V, at f = 3}
mA
-
35
45
MHz
Input Leakage Current
Output Leakage
Current
Input Low Voltage
ILI VIN = VSS to VDD
ILO VOUT = VSS to VDD
VIL
-
Input High Voltage
VIH
-
Output Low Voltage
VOL IOL = 2.1 mA
-
-
90 μA
-
-
90 μA
-0.5 -
0.8 V
2.0
-
VDD
+0.5
V
-
- 0.45 V
Output High Voltage VOH IOH = -0.1mA
2.4 -
-
V
- 17 -
Publication Release Date: Dec. 28, 2005
Revision A4