VSC6511 Datasheet, PDF (1/22 Pages) Vitesse Semiconductor Corporation – SMPTE-292M Serializer, Deserializer, and Deserializer/Reclocker at 1.485Gb/s

VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
VSC6511
Features
• Compliant with SMPTE-292M @ 1.485Gb/s
• Multiple Functions: Serializer, Deserializer,
and Deserializer with Reclocker
• 20 Bit TTL Interface @ 74.25 MHz
• Scrambler / Descrambler with ENABLE
• CRC Generator/Checker with ENABLE
SMPTE-292M Serializer, Deserializer, and
Deserializer/Reclocker at 1.485Gb/s
• Data Framer aligns data and provides TRS on
SAV/EAV events
• Clock Multiplier and Recovery Units
• 2 or 4 configurable 75ohm cable driver o/ps
• 3.3V,Lowpower--700-1500mWtypical
• 64-pin, 10x10x1.0mm Exposed Pad TQFP
General Description
The VSC6511 multi function SMPTE-292M compatible IC with Serializer, Deserializeror, or Deserializer
with reclocker modes which operate at 1.485Gb/s. As a Serializer, 20-bits of data (D19:0) are latched into the
part on the rising edge of REFCLK then scrambled and serialized out SDO0/SDO0 and/or SDO1/SDO1. An
optional CRC Generator may be enabled. As a Deserializer, serial data on SDI/SDI is recovered, de-scrambled
and deserialized onto D[19:0]. Frame alignment on SAV/EAV, line detection and frame detection outputs are
provided. As a Deserializer with reclocker, the device functions as ain the deserializer mode above and serial
data on SDI/SDI is recovered and retransmitted on SDO0/SDO0 and/or SDO1/SDO1.
VSC6511 Block Diagram
D[19:0]
DQ
CRC Gen
Scrambler
Serializer
SCREN
CRC
OE0
SDO0
SDO0
ISET0
OE1
SDO1
SDO1
ISET1
CABLE DRIVER
OUTPUTS
IP
IN
MODE0
MODE1
REFCLK
74.25 MHz
Clock/
Recovery
Unit
Deserializer
1.485 GHz
/20
Clock
Multiply
/20
x20
1.485 GHz
NRZI Decoder
Descrambler
CRC Check ^{D Q}
Framer
SIGDET
1001
LINE
FRAME
HANC
RCLK
G52311-0, Rev. 2.0
4/10/00
© VITESSE SEMICONDUCTOR CORPORATION
741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: [phone]
Page 1