LMH6586_14 Datasheet, PDF (7/34 Pages) Texas Instruments – 32x16 Video Crosspoint Switch

LMH6586
www.ti.com
SNCS105D – JULY 2008 – REVISED MARCH 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
ESD Tolerance⁽³⁾
Supply Voltage (V_DD)
Video Input Voltage Range, V_IN
Storage Temperature Range
Lead Temperature (Soldering, 10 sec)
Junction Temperature
Human Body Model
Machine Model
2500V
250V
5V
−0.3V to V_DD +0.3V
−65°C to +150°C
300°C
+150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
Operating Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
Ambient Temperature Range
θ_JA
5V ± 10%
−40°C ≤ T_A ≤ 85°C
25°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) The maximum power dissipation is a function of T_J(MAX) and θ_JA. The maximum allowable power dissipation at any ambient temperature
is P_D = (T_J(MAX) – T_A)/ θ_JA. All numbers apply for packages soldered directly onto a PC Board.
Electrical Characteristics⁽¹⁾
Unless otherwise specified, all limits ensured for T_A = 25°C, V_DD = 5V, R_EXT = 10 kΩ 1%, VREF_CLAMP = 300 mV, R_L =
150Ω, C_L = 12 pF.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
DC Specifications
V_DD
Operating Supply Voltage
I_DD
Supply Current
Power Save Supply Current
No Load, A_V = 1 V/V
No Load, A_V = 1 V/V, SCL= SDA=
PWDN= DVDD
4.5
5.5
V
300
360
mA
1.5
mA
A_V
Gain
2x Gain Buffer
1x Gain Buffer
1.92
2.00
2.07
V/V
0.95
0.99
1.03
ΔA_{V_CH-CH} Gain Matching (Ch to Ch)
V_OS
Output Offset Voltage
A_V = 1 V/V
A_V = 1 V/V, No Load (referenced to DC
restored input)
1.2
3
%
60
mV
V_{DET_LSB}
V_DET
Video Detection Threshold LSB
Video Detection Threshold Offset
85
95
105
mV
Video detection threshold offset
±50
mV
measured above sync tip level of DC
restored input
AC Specifications
BW_SS
BW_LS
t_r/t_f
tp
t_pCh-Ch
Small Signal Bandwidth (−3 dB)
Large Signal Bandwidth (−3 dB)
Rise/Fall Time
Propagation Delay
Ch-Ch Propagation Delay
V_OUT = 20 mV_PP
V_OUT = 1.5 V_PP
10% to 90%, V_OUT = 2 V_PP
50% to 50%, V_OUT = 2 V_PP
50% to 50%, V_OUT = 2 V_PP
66
MHz
29
MHz
35
ns
5
ns
5
ns
(1) All voltages are measured with respect to GND, unless otherwise specified.
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LMH6586
Submit Documentation Feedback
7