DS99R124AQ_14 Datasheet, PDF (6/31 Pages) Texas Instruments – 5 - 43 MHz 18-bit Color FPD-Link II to FPD-Link Converter

DS99R124AQ
SNLS342A – JULY 2011 – REVISED APRIL 2013
www.ti.com
DC Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.^(1)(2)(3)
Parameter
Test Conditions
Pin/Freq.
Min
Typ Max Units
FPD-Link LVDS Output
|V_OD|
Differential Output Voltage
VODSEL = L
VODSEL = H
100
250
400 mV
200
400
600 mV
V_ODp-p
ΔV_OD
V_OS
Differential Output Voltage
A-B
Output Voltage Unbalance
Offset Voltage
R_L = 100Ω
VODSEL = L
VODSEL = H
TxCLKOUT+,
TxCLKOUT-,
VODSEL = L _TxOUT[2:0]+, 1.0
VODSEL = H ^TxOUT[2:0]-
500
mVp-p
800
mVp-p
1
50
mV
1.2
1.5
V
1.2
V
ΔV_OS
Offset Voltage Unbalance
I_OS
Output Short Circuit Current
Vout = GND
I_OZ
Output TRI-STATE Current
OEN = GND,
Vout =V_DDTX, or GND
3.3 V I/O LVCMOS DC SPECIFICATIONS – V_DDIO = 3.0 to 3.6V
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IN
Input Current
V_IN = 0V or V_DDIO
1
50
mV
-5
mA
-10
+10
µA
PDB,
VODSEL,
OEN,
OSS_SEL,
LFMODE,
SSC[2:0],
BISTEN,
BISTM
2.2
GND
−15
V_DDIO
V
0.8
V
±1
+15
μA
V_OH
High Level Output Voltage
I_OH = −0.5 mA
V_OL
Low Level Output Voltage
I_OL = +0.5 mA
I_OS
Output Short Circuit Current
V_OUT = 0V
I_OZ
TRI-STATE Output Current
PDB = 0V, OSS_SEL = 0V,
V_OUT = 0V or V_DDIO
1.8 V I/O LVCMOS DC SPECIFICATIONS – V_DDIO = 1.71 to 1.89V
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IN
Input Current
V_IN = 0V or V_DDIO
LOCK,
PASS,
OS[2:0]
V_DDIO-
0.2
V_DDIO
V
GND 0.2
V
-10
mA
−10
+10
µA
PDB,
VODSEL,
OEN,
OSS_SEL,
LFMODE,
SSC[2:0],
BISTEN,
BISTM
0.7
V_DDIO
GND
−10
V_DDIO
V
0.35*
V_DDIO
V
±1
+10
μA
V_OH
High Level Output Voltage
I_OH = −0.1 mA
V_OL
Low Level Output Voltage
I_OL = +0.1 mA
I_OS
Output Short Circuit Current
V_OUT = 0V
I_OZ
TRI-STATE Output Current
V_OUT = 0V or V_DDIO
LOCK,
PASS,
OS[2:0]
V_DDIO
- 0.2
V_DDIO
V
GND
0.2
V
-3
mA
-15
+15
µA
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(2) Typical values represent most likely parametric norms at V_DDn = 1.8V, V_DDTX = 3.3V, V_DDIO = 1.8V or 3.3V, Ta = +25 °C, and at the
Recommended Operation Conditions at the time of product characterization and are not ensured.
(3) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
6
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: DS99R124AQ