MSP430F6638 Datasheet, PDF (54/126 Pages) Texas Instruments – Mixed-Signal Microcontrollers

MSP430F6638, MSP430F6637, MSP430F6636, MSP430F6635
MSP430F6634, MSP430F6633, MSP430F6632, MSP430F6631, MSP430F6630
SLAS566E – JUNE 2010 – REVISED DECEMBER 2015
www.ti.com
5.52 Ports PU.0 and PU.1
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
V_OH
High-level output voltage
V_USB = 3.3 V ±10%, I_OH = –25 mA
2.4
V_OL
Low-level output voltage
V_USB = 3.3 V ±10%, I_OL = 25 mA
V_IH
High-level input voltage
V_USB = 3.3 V ±10%
2.0
V_IL
Low-level input voltage
V_USB = 3.3 V ±10%
MAX
0.4
0.8
UNIT
V
V
V
V
5.53 USB Output Ports DP and DM
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
V_OH
D+, D– single ended
USB 2.0 load conditions
2.8
V_OL
D+, D– single ended
USB 2.0 load conditions
0
Z_(DRV) D+, D– impedance
Including external series resistor of 27 Ω
28
t_RISE
Rise time
Full speed, differential, C_L = 50 pF, 10%/90%, Rpu on D+
4
t_FALL
Fall time
Full speed, differential, C_L = 50 pF, 10%/90%, Rpu on D+
4
MAX
3.6
0.3
44
20
20
UNIT
V
V
Ω
ns
ns
5.54 USB Input Ports DP and DM
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
MIN
V_(CM)
Differential input common-mode range
0.8
Z_(IN)
Input impedance
300
V_CRS
Crossover voltage
1.3
V_IL
Static SE input logic low level
V_IH
Static SE input logic high level
2.0
VDI
Differential input voltage
MAX
2.5
2.0
0.8
0.2
UNIT
V
kΩ
V
V
V
V
5.55 USB-PWR (USB Power System)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
V_LAUNCH
V_BUS
V_USB
V₁₈
I_{USB_EXT}
I_DET
I_SUSPEND
V_BUS detection threshold
USB bus voltage
USB LDO output voltage
Internal USB voltage⁽¹⁾
Maximum external current from VUSB terminal⁽²⁾
USB LDO current overload detection⁽³⁾
Operating supply current into VBUS terminal.⁽⁴⁾
Normal operation
USB LDO is on
USB LDO is on,
USB PLL disabled
3.75 V
3.76
5.5 V
3.3 ±9% V
1.8
V
12 mA
60
100 mA
250 µA
C_BUS
C_USB
C₁₈
t_ENABLE
R_PUR
VBUS terminal recommended capacitance
VUSB terminal recommended capacitance
V18 terminal recommended capacitance
Settling time V_USB and V₁₈
Pullup resistance of PUR terminal⁽⁵⁾
Within 2%,
recommended capacitances
4.7
µF
220
nF
220
nF
2 ms
70 110 150 Ω
(1) This voltage is for internal use only. No external DC loading should be applied.
(2) This represents additional current that can be supplied to the application from the VUSB terminal beyond the needs of the USB
operation.
(3) A current overload is detected when the total current supplied from the USB LDO, including I_{USB_EXT}, exceeds this value.
(4) Does not include current contribution of R_pu and R_pd as outlined in the USB specification.
(5) This value, in series with an external resistor between PUR and D+, produces the R_pu as outlined in the USB specification.
54
Specifications
Copyright © 2010–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430F6638 MSP430F6637 MSP430F6636 MSP430F6635 MSP430F6634 MSP430F6633
MSP430F6632 MSP430F6631 MSP430F6630