BQ25872 Datasheet, PDF (5/68 Pages) Texas Instruments – Battery Switch Charger

www.ti.com
bq25872
SLUSCQ6 – OCTOBER 2016
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Voltage range (with respect to GND)
Maximum voltage difference
Output sink current
Operating free-air temperature range
Junction temperature, T_J
Storage temperature, T_stg
VUSB (EN = Low, or CHG_EN = '0')
VBUS (EN = Low, or CHG_EN = '0')
VOUT (EN = Low, or CHG_EN = '0')
SRP, SRN, BATP, BATN
INT, SDA, SCL, EN, CHGSTAT
TS_BUS, TS_BAT
SRP – SRN
VOUT– VBUS
INT
MIN
–2
–2
–0.3
–0.3
–0.3
–0.3
–0.5
–22
–40
–40
–65
MAX
40
22
7
7
7
5
0.5
7
6
85
150
150
UNIT
V
V
V
V
V
V
V
V
mA
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
±2000
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
V
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: bq25872
Submit Documentation Feedback
5