TLC34077 Datasheet, PDF (40/41 Pages) Texas Instruments – Video Interface Palette Data Manual

Mechanical Data
FN020, FN028, FN044, FN052, FN068, and FN084
plastic J-leaded chip carrier (continued)
JEDEC
OUTLINE
MO-047AA
MO-047AB
MO-047AC
MO-047AD
MO-047AE
MO-047AF
NO. OF
PINS
20
28
44
52
68
84
A
MIN MAX
4,19 4,57
(0.165) (0.180)
4,19 4,57
(0.165) (0.180)
4,19 4,57
(0.165) (0.180)
4,19 5,08
(0.165) (0.200)
4,19 5,08
(0.165) (0.200)
4,19 5,08
(0.165) (0.200)
A1
MIN MAX
2,29 3,05
(0.090) (0.120)
2,29 3,05
(0.090) (0.120)
2,29 3,05
(0.090) (0.120)
2,29 3,30
(0.090) (0.130)
2,29 3,30
(0.090) (0.130)
2,29 3,30
(0.090) (0.130)
D, E
MIN MAX
9,78 10,03
(0.385) (0.395)
12,32 12,57
(0.485) (0.495)
17,40 17,65
(0.685) (0.695)
19,94 20,19
(0.785) (0.795)
25,02 25,27
(0.985) (0.995)
30,10 30,35
(1.185) (1.195)
D1, E1
MIN MAX
8,89 9,04
(0.350) (0.356)
11,43 11,58
(0.450) (0.456)
16,51 16,66
(0.650) (0.656)
19,05 19,20
(0.750) (0.756)
24,13 24,33
(0.950) (0.958)
29,21 29,41
(1.150) (1.141)
D2, E2
MIN MAX
7,37 8,38
(0.290) (0.330)
9,91 10,92
(0.390) (0.430)
14,99 16,00
(0.590) (0.630)
17,53 18,54
(0.690) (0.730)
22,61 23,62
(0.890) (0.930)
27,69 28,70
(1.090) (1.130)
D3, E3
BASIC
5,08
(0.200)
7,62
(0.300)
12,70
(0.500)
15,24
(0.600)
20,32
(0.800)
25,40
(1.000)
NOTES: A. All dimensions conform to JEDEC Specification MO-047AA/AF. Dimensions and tolerancing are per ANSI
Y14.5M – 1982.
B. Dimensions D1 and E1 do not include mold flash protrusion. Protrusion shall not exceed 0,25 (0.010) on any
side. Centerline of center pin each side is within 0,10 (0.004) of package centerline by dimension B. The lead
contact points are planar within 0,10 (0.004).
C. Datums D – E and F – G for center leads are determined at datum – H – .
D. Datum – H – is located at top of leads where they exit plastic body.
E. Location of datums – A – and – B – to be determined at datum – H – .
F. Determined at seating plane – C – .
C-2