DS90LV047A_16 Datasheet, PDF (4/25 Pages) Texas Instruments – 3-V LVDS Quad CMOS Differential Line Driver

DS90LV047A
SNLS044D – MAY 2000 – REVISED JULY 2016
6.2 ESD Ratings
V_(ESD) Electrostatic discharge⁽¹⁾
(1) ESD Ratings:
HBM (1.5 kΩ, 100 pF)
EIAJ (0 Ω, 200 pF)
Human-body model (HBM)
Machine Model
6.3 Recommended Operating Conditions
Supply voltage, V_CC
Operating free air temperature, T_A
www.ti.com
VALUE
±10000
±1200
UNIT
V
MIN
NOM MAX UNIT
3
3.3
3.6
V
−40
25
85
°C
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
DS90LV047A
PW (TSSOP)
UNIT
16 PINS
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
114
°C/W
51
°C/W
59
°C/W
8
°C/W
58
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
6.5 Electrical Characteristics
Over supply voltage and operating temperature ranges, unless otherwise specified^(1)(2)(3)
PARAMETER
TEST CONDITIONS
PIN
V_OD1
ΔV_OD1
Differential output voltage
Change in magnitude of V_OD1 for
complementary output states
V_OS
ΔV_OS
Offset voltage
Change in magnitude of V_OS for
complementary output states
R_L = 100 Ω (Figure 17)
D_OUT−
D_OUT+
V_OH
Output high voltage
V_OL
Output low voltage
V_IH
Input high voltage
V_IL
Input low voltage
I_IH
Input high current
I_IL
Input low current
V_CL
Input clamp voltage
D_IN,
V_IN = V_CC or 2.5 V
EN,
V_IN = GND or 0.4 V
EN*
I_CL = −18 mA
MIN
250
1.125
0.9
2
GND
−10
−10
−1.5
TYP
310
1
1.17
1
1.33
1.02
2
−2
−0.8
MAX
450
35
1.375
25
1.6
V_CC
0.8
+10
+10
UNIT
mV
|mV|
V
|mV|
V
V
V
V
µA
µA
V
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except: V_OD1 and ΔV_OD1.
(2) All typicals are given for: V_CC = 3.3 V, T_A = +25°C.
(3) The DS90LV047A is a current mode device and only functions within datasheet specifications when a resistive load is applied to the
driver outputs typical range is (90 Ω to 110 Ω).
4
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: DS90LV047A