DS90LV047A_16 Datasheet, PDF (15/25 Pages) Texas Instruments – 3-V LVDS Quad CMOS Differential Line Driver

www.ti.com
DS90LV047A
SNLS044D – MAY 2000 – REVISED JULY 2016
Typical Application (continued)
Figure 24 shows very good typical performance that can be used as a design guideline for data rate vs cable
length. Increasing the jitter percentage increases the curve respectively, allowing the device to transmit faster
over longer cable lengths. This relaxes the jitter tolerance of the system allowing more jitter into the system,
which could reduce the reliability and efficiency of the system. Alternatively, decreasing the jitter percentage has
the opposite effect on the system. The area under the curve is considered the safe operating area based on the
above signal quality criteria. For more information on eye pattern testing, please see AN-808 Long Transmission
Lines and Data Signal Quality (SNLA028).
9.2.3 Application Curve
Figure 24. Power Supply Current vs Frequency
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: DS90LV047A
Submit Documentation Feedback
15