DS90LV047A_16 Datasheet, PDF (3/25 Pages) Texas Instruments – 3-V LVDS Quad CMOS Differential Line Driver

www.ti.com
5 Pin Configuration and Functions
D or PW Package
16-Pin SOIC or TSSOP
Top View
DS90LV047A
SNLS044D – MAY 2000 – REVISED JULY 2016
NAME
D_IN
D_OUT+
D_OUT−
EN
PIN
NO.
2, 3, 6, 7
10, 11, 14, 15
9, 12, 13, 16
1
EN*
8
GND
5
V_CC
4
Pin Functions
I/O
DESCRIPTION
I
Driver input pin, TTL/CMOS compatible
O
Non-inverting driver output pin, LVDS levels
O
Inverting driver output pin, LVDS levels
Driver enable pin: When EN is low, the driver is disabled. When EN is high and EN* is low
I
or open, the driver is enabled. If both EN and EN* are open circuit, then the driver is
disabled.
Driver enable pin: When EN* is high, the driver is disabled. When EN* is low or open and
I
EN is high, the driver is enabled. If both EN and EN* are open circuit, then the driver is
disabled.
—
Ground pin
—
Power supply pin, +3.3 V ± 0.3 V
6 Specifications
6.1 Absolute Maximum Ratings
See ⁽¹⁾
MIN
MAX
UNIT
Supply voltage (V_CC)
Input voltage (D_IN)
Enable input voltage (EN, EN*)
Output voltage (D_OUT+, D_OUT–)
Short-circuit duration
(D_OUT+, D_OUT–)
D0016A package
Maximum package power ^{PW0016A package}
dissipation at +25°C
Derate D0016A package
Derate PW0016A package
above +25°C
above +25°C
−0.3
4
−0.3
−0.3
−0.3
V_CC + 0.3
V_CC + 0.3
3.9
Continuous
1088
866
8.5
6.9
V
V
V
V
mW
mW/°C
Lead temperature
Soldering (4 s)
260
°C
Maximum junction temperature
150
°C
Storage temperature, T_stg
−65
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: DS90LV047A
Submit Documentation Feedback
3