BQ24765_15 Datasheet, PDF (35/43 Pages) Texas Instruments – SMBus-Controlled Multi-Chemistry Battery Charger With Integrated Power MOSFETs

www.ti.com
12 Device and Documentation Support
bq24765
SLUS999A – NOVEMBER 2009 – REVISED NOVEMBER 2015
12.1 Device Support
12.1.1 Third-Party Products Disclaimer
TI'S PUBLICATION OF INFORMATION REGARDING THIRD-PARTY PRODUCTS OR SERVICES DOES NOT
CONSTITUTE AN ENDORSEMENT REGARDING THE SUITABILITY OF SUCH PRODUCTS OR SERVICES
OR A WARRANTY, REPRESENTATION OR ENDORSEMENT OF SUCH PRODUCTS OR SERVICES, EITHER
ALONE OR IN COMBINATION WITH ANY TI PRODUCT OR SERVICE.
12.1.2 Device Nomenclature
VICM
Output Voltage of Input Current Monitor
ICREF
Input Current Reference - sets the threshold for the input current limit
DPM
Dynamic Power Management
CSOP, CSON Current Sense Output of battery positive and negative
These pins are used with an external low-value series resistor to monitor the current to and
from the battery pack.
CSSP, CSSN Current Sense Supply positive and negative
These pins are used with an external low-value series resistor to monitor the current from
the adapter supply.
POR
Power on reset
12.2 Documentation Support
12.2.1 Related Documentation
• bq24765 EVM (HPA349) User's Guide, SLUU415
• bq24765 SMB evaluation software SLVC309
12.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.5 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
Copyright © 2009–2015, Texas Instruments Incorporated
Product Folder Links: bq24765
Submit Documentation Feedback
35