TLC5973 Datasheet, PDF (3/34 Pages) Texas Instruments – TLC5973 3-Channel, 12-Bit, PWM Constant-Current LED Driver with Single-Wire Interface (EasySet)

www.ti.com
5 Pin Configuration and Functions
D Package
SO-8
(Top View)
OUT0 1
OUT1 2
OUT2 3
GND 4
8 VCC
7 IREF
6 SDI
5 SDO
TLC5973
SBVS225B – MARCH 2013 – REVISED MAY 2014
NAME
OUT0
OUT1
OUT2
GND
SDO
SDI
IREF
VCC
PIN
NO.
1
2
3
4
5
6
7
8
Pin Functions
I/O
DESCRIPTION
O _{Constant sink current driver outputs.}
O Multiple outputs can be configured in parallel to increase the sink drive current capability.
O ^{Different voltages can be applied to each output.}
— Power ground
O Serial data output
I Serial data input. This pin is internally pulled down to GND with a 1-MΩ (typ) resistor.
I/O
Output current programming pin. A resistor connected between IREF and GND sets the current for
each constant-current output. Place the external resistor close to the device.
— Power-supply voltage
6 Specifications
6.1 Absolute Maximum Ratings⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
UNIT
Voltage ⁽²⁾
Supply, V_CC
Input range, V_IN
Output range, V_OUT
VCC
SDI
OUT0 to OUT2
SDO
–0.3
7.0
V
–0.3
V_CC + 1.2
V
–0.3
21
V
–0.3
7.0
V
Current
Operating junction temperature, T_J
Output (dc), I_OUT
OUT0 to OUT2
0
60
mA
–40
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods my affect device reliability.
(2) All voltages are with respect to network ground pin.
6.2 Handling Ratings
T_stg
V_(ESD)
Storage temperature range
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all
pins ⁽¹⁾
Charged device model (CDM), per JEDEC specification
JESD22-C101, all pins⁽²⁾
MIN
–55
–8000
–2000
MAX
150
8000
2000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
°C
V
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: TLC5973
Submit Documentation Feedback
3