English
Language : 

TLC5973 Datasheet, PDF (1/34 Pages) Texas Instruments – TLC5973 3-Channel, 12-Bit, PWM Constant-Current LED Driver with Single-Wire Interface (EasySet)
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TLC5973
SBVS225B – MARCH 2013 – REVISED MAY 2014
TLC5973 3-Channel, 12-Bit, PWM Constant-Current LED Driver
with Single-Wire Interface (EasySet™)
1 Features
•1 Three Constant Sink Current Channels
• Current Capability:
– 2 mA to 35 mA per Channel (VCC ≤ 4.0 V)
– 2 mA to 50 mA per Channel (VCC > 4.0 V)
• Grayscale (GS) Control with PWM:
– 12-Bit (4096 Steps)
• Single-Wire Interface (EasySet)
• Power-Supply (VCC) Voltage Range:
– 3 V to 6 V
• OUT Pins Maximum Voltage: Up to 21 V
• Integrated Shunt Regulator
• Data Transfer Maximum Rate:
– Bits per Second (bps): 3 Mbps
• Internal GS Clock Oscillator: 12 MHz (typ)
• Display Repeat Rate: 2.9 kHz (typ)
• Output Delay Switching to Prevent Inrush Current
• Unlimited Device Cascading
• Operating Temperature: –40°C to 85°C
space
space
space
2 Applications
This device is targeted towards one application.
The primary application for this device is for RGB
LED cluster lamp displays.
3 Description
The TLC5973 is an easy-to-use, 3-channel, 50-mA
constant sink current LED driver. The single-wire,
3-Mbps serial interface (EasySet) provides a solution
for minimizing wiring cost. The LED driver provides
12-bit pulse width modulation (PWM) resolution. The
display repeat rate is achieved at 2.9 kHz (typ) with
an integrated 12-MHz grayscale (GS) clock oscillator.
The driver also provides unlimited cascading
capability.
All output sink constant currents can be set by an
external resistor. The TLC5973 has an internal shunt
regulator that can be used for higher VCC power-
supply voltage applications.
Device Information(1)
DEVICE NAME
PACKAGE
BODY SIZE
TLC5973
SOIC (8)
4.9 mm × 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Typical Application Circuit Example
Power
Supply
(5 V)
VCC
GND
Controller
RIREF
GND
IREF
Device
SDI
VCC
OUT0
OUT1
OUT2
SDO
RIREF
GND
IREF
Device
SDI
VCC
OUT0
OUT1
OUT2
SDO
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.