DS99R421_14 Datasheet, PDF (3/27 Pages) Texas Instruments – 5-43 MHz FPD-Link LVDS (3 Data + 1 Clock) to FPD-Link II LVDS (Embedded Clock DC DCBalanced)

DS99R421
www.ti.com
SNLS264D – JUNE 2007 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
LVCMOS Input Voltage
LVCMOS Output Voltage
LVDS Receiver Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 4 seconds)
Maximum Package Power Dissipation
Capacity
ESD Rating
Package De-rating: DS99R421 − 36L WQFN
θ_JA
θ_JC
HBM
ISO10605
R_D = 2 kΩ, C_S = 150/330 pF
Contact Discharge, DOUT±
Air Discharge, DOUT±
−0.3V to +4V
−0.3V to (V_DD +0.3V)
−0.3V to (V_DD +0.3V)
−0.3V to +3.9V
−0.3V to +3.9V
10 ms
+150°C
−65°C to +150°C
+260°C
1/θ_JA °C/W above +25°C
37.6 (4L⁽³⁾); 83.7 (2L⁽³⁾)°C/W
3.1 (2/4L⁽³⁾) °C/W
≥±8 kV
DS99R421 meets ISO10605
±10 kV
±25 kV
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(3) JEDEC
Recommended Operating Conditions
Supply Voltage (V_DD)
Operating Free Air Temperature (T_A)
Input Clock Rate, RxCLKIN±
Supply Noise (V_DDp-p)
Receiver Input Range
Min
Nom
Max
Units
3.0
3.3
3.6
V
−40
+25
+105
°C
5
43
MHz
±100
mV_P-P
0
V_DD
V
Electrical Characteristics^(1)(2)(3)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Pin/Freq.
Min
Typ
Max Units
LVCMOS & SCHMITT-TRIGGER INPUT DC SPECIFICATIONS
V_IH
V_IL
V_CL
I_IN
V_TH+
V_TH−
V_H
High Level Input Voltage
Low Level Input Voltage
Input Clamp Voltage
Input Current
High Level Input Voltage
High Level Input Voltage
Hysteresis Voltage
I_CL = −18 mA
V_IN = 0V or 3.6V
V_TH+ – V_TH−
PWDNB, DEN, VODSEL,
BISTEN
OS[2:0]
(Schmitt-triggered Inputs)
2.0
GND
V_DD
V
0.8
V
−0.9 −1.5
V
−10
+10
µA
2.0
V
0.8
V
200
400
600
mV
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(2) Typical values represent most likely parametric norms at 3.3V, Ta = +25 degC, and at the Recommended Operation Conditions at the
time of product characterization and are not ensured.
(3) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except V_OD, ΔV_OD, V_TH and V_TL which are differential voltages.
Copyright © 2007–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS99R421