|
SM74203 Datasheet, PDF (2/24 Pages) Texas Instruments – SM74203 60V Low Side Controller for Boost and SEPIC | |||
|
◁ |
SM74203
August 16, 2011
60V Low Side Controller for Boost and SEPIC
General Description
The SM74203 is a high voltage low-side N-channel MOSFET
controller ideal for use in boost and SEPIC regulators. It con-
tains all of the features needed to implement single ended
primary topologies. Output voltage regulation is based on
current-mode control, which eases the design of loop com-
pensation while providing inherent input voltage feed-forward.
The SM74203 includes a start-up regulator that operates over
a wide input range of 6V to 60V. The PWM controller is de-
signed for high speed capability including an oscillator fre-
quency range up to 2 MHz and total propagation delays less
than 100 ns. Additional features include an error amplifier,
precision reference, line under-voltage lockout, cycle-by-cy-
cle current limit, slope compensation, soft-start, external syn-
chronization capability and thermal shutdown. The SM74203
is available in the MSOP-10 package.
Features
â Renewable Energy Grade
â Internal 60V Startup Regulator
â 1A Peak MOSFET Gate Driver
â VIN Range 6V to 60V
â Duty Cycle Limit of 90%
â Programmable UVLO with Hysteresis
â Cycle-by-Cycle Current Limit
â External Synchronizable (AC-coupled)
â Single Resistor Oscillator Frequency Set
â Slope Compensation
â Adjustable Soft-start
â MSOP-10 Package
Applications
â Boost Converter
â SEPIC Converter
Typical Application
SM74203 in a boost converter.
© 2011 National Semiconductor Corporation 301593
30159301
www.national.com
|
▷ |