CC1310_16 Datasheet, PDF (15/54 Pages) Texas Instruments – SimpleLink Ultralow Power Sub-1-GHz Wireless MCU

www.ti.com
CC1310
SWRS181B – SEPTEMBER 2015 – REVISED OCTOBER 2015
Receive (RX) Parameters (continued)
Measured on the Texas Instruments CC1310EM-7XD-7793 reference design with T_c = 25°C, V_DDS = 3.0 V, DC-DC enabled,
f_RF = 868 MHz, unless otherwise noted. All measurements are done at the antenna input with a combined RX and TX path.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Selectivity, ±200 kHz, long-range mode
625 bps
Wanted signal 3-dB above sensitivity limit. 10 ksps,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX BW , BER = 10^–2
61, 61
dB
Blocking ±1 MHz, long-range mode
625 bps
Wanted signal 3-dB above sensitivity limit. 10 ksps,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX BW , BER = 10^–2
73, 75
dB
Blocking ±2 MHz, long-range mode
625 bps
Wanted signal 3-dB above sensitivity limit. 10 ksps,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX BW , BER = 10^–2
78, 79
dB
Blocking ±10 MHz, long-range mode
625 bps
Wanted signal 3-dB above sensitivity limit. 10 ksps,
GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX BW , BER = 10^–2
89, 90
dB
5.7 Transmit (TX) Parameters
Measured on the Texas Instruments CC1310EM-7XD-7793 reference design with T_c = 25°C, V_DDS = 3.0 V, DC-DC enabled,
f_RF = 868 MHz, unless otherwise noted. All measurements are done at the antenna input with a combined RX and TX path.
PARAMETER
TEST CONDITIONS
MIN
TYP MAX UNIT
Max output power, boost mode
VDDR = 1.95 V
Min VDDS for boost mode is 2.1 V
868 MHz and 915 MHz
14
dBm
Max output power
868 MHz and 915 MHz
12
dBm
Output power programmable range
24
dB
Output power variation
Tested at +10-dBm setting
±0.7
dB
Output power variation, boost bode
+14 dBm
±0.5
dB
30 MHz to 1 GHz
Spurious emissions
(excluding harmonics)⁽¹⁾
Transmitting +14 dBm
ETSI restricted bands
Transmitting +14 dBm
ETSI outside restricted bands
<–59
<–51
dBm
dBm
1 GHz to 12.75 GHz
Transmitting +14 dBm
measured in 1-MHz bandwidth (ETSI)
<–37
dBm
Second harmonic
Transmitting +14 dBm, conducted
868 MHz, 915 MHz
–52, –55
dBm
Harmonics
Third harmonic
Transmitting +14 dBm, conducted
868 MHz, 915 MHz
–58, –55
dBm
Fourth harmonic
Transmitting +14 dBm, conducted
868 MHz, 915 MHz
–56, –56
dBm
(1) Suitable for systems targeting compliance with EN 300 220, EN 54-25, EN 303 131, EN 303 204, FCC CFR47 Part 15, ARIB STD-T108.
Copyright © 2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC1310
Specifications
15