TMS320F28075 Datasheet, PDF (134/182 Pages) Texas Instruments – Microcontrollers

TMS320F28075
SPRS902B – OCTOBER 2014 – REVISED OCTOBER 2015
5.10.5.1 SPI Electrical Data and Timing
The following sections contain the SPI External Timings in Non-High-Speed Mode:
Section 5.10.5.1.1
Section 5.10.5.1.2
Section 5.10.5.1.3
Section 5.10.5.1.4
Master Mode External Timings Where Clock Phase = 0
Master Mode External Timings Where Clock Phase = 1
Slave Mode External Timings Where Clock Phase = 0
Slave Mode External Timings Where Clock Phase = 1
The following sections contain the SPI External Timings in High-Speed Mode:
Section 5.10.5.1.5
Section 5.10.5.1.6
Section 5.10.5.1.7
Section 5.10.5.1.8
High-Speed Master Mode External Timings Where Clock Phase = 0
High-Speed Master Mode External Timings Where Clock Phase = 1
High-Speed Slave Mode External Timings Where Clock Phase = 0
High-Speed Slave Mode External Timings Where Clock Phase = 1
www.ti.com
NOTE
All timing parameters for SPI High-Speed Mode assume a load capacitance of 5 pF on
SPICLK, SPISIMO, and SPISOMI.
For more information about the SPI in High-Speed mode, see the "Serial Peripheral Interface (SPI)"
chapter of the TMS320F2807x Piccolo Microcontrollers Technical Reference Manual (SPRUHM9).
In order to use the SPI in High-Speed mode, the application must use the high-speed enabled GPIOs (see
Section 4.5.5).
134 Specifications
Copyright © 2014–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320F28075