MSP430F5310 Datasheet, PDF (1/106 Pages) Texas Instruments – MSP430F5310 and MSP430F530x Mixed-Signal Microcontrollers

www.ti.com
MSP430F5310, MSP430F5309
MSP430F5308, MSP430F5304
SLAS677E – SEPTEMBER 2010 – REVISED NOVEMBER 2013
MSP430F5310 and MSP430F530x Mixed-Signal Microcontrollers
Check for Samples: MSP430F5310, MSP430F5309, MSP430F5308, MSP430F5304
FEATURES
1
•23 Low Supply-Voltage Range:
3.6 V Down to 1.8 V
• Ultra-Low-Power Consumption
– Active Mode (AM)
All System Clocks Active
– 195 µA/MHz (Typical) at 8 MHz, 3 V,
Flash Program Execution
– 115 µA/MHz (Typical) at 8 MHz, 3 V, RAM
Program Execution
– Standby Mode (LPM3)
– Real-Time Clock (RTC) With Crystal,
Watchdog, and Supply Supervisor
Operational, Full RAM Retention, Fast
Wake Up:
1.9 µA (Typical) at 2.2 V,
2.1 µA (Typical) at 3 V
– Low-Power Oscillator (VLO), General-
Purpose Counter, Watchdog, and
Supply Supervisor Operational, Full
RAM Retention, Fast Wake Up:
1.4 µA (Typical) at 3 V
– Off Mode (LPM4)
Full RAM Retention, Supply Supervisor
Operational, Fast Wake Up:
1.1 µA at 3 V (Typical)
– Shutdown Mode (LPM4.5)
0.18 µA at 3 V (Typical)
• Wake Up From Standby Mode in Less Than
5 µs
• 16-Bit RISC Architecture, Extended Memory,
Up to 25-MHz System Clock
• Flexible Power Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring,
and Brownout
• Unified Clock System
– FLL Control Loop for Frequency
Stabilization
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Watch Crystals (XT1)
– High-Frequency Crystals up to 32 MHz
(XT2)
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Two Universal Serial Communication
Interfaces (USCIs)
– USCI_A0 and USCI_A1 Each Support:
– Enhanced UART Supports Auto-
Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1 Each Support:
– I²C
– Synchronous SPI
• Integrated 3.3-V Power System
• 10-Bit Analog-to-Digital Converter (ADC) With
Window Comparator
• Comparator
• Hardware Multiplier Supports 32-Bit
Operations
• Serial Onboard Programming, No External
Programming Voltage Needed
• Three-Channel Internal DMA
• Basic Timer With RTC Feature
• Table 1 Summarizes Family Members
• For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430, Code Composer Studio are trademarks of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2013, Texas Instruments Incorporated